少妇AV不卡,01午夜福利视频,中文字幕八区,日韩123区网站,国产中文视频,人妻斩精品资源,日韩在线婷婷视频,清清草视频,不卡不卡5区

7*24 Hour working hours all the time

0531-85919987

Product navigation

Technology

Your current position:Home > Technology
Solution for the determination of freezing point of antifreeze glycerol
2021-04-07 13:11:03 admin 1356

Solution for the determination of freezing point of antifreeze glycerol



The freezing point of pure glycerol is 17.9℃. With the increase of water content in glycerol, the freezing point decreases gradually. However, when it drops to -46.5℃, if the content of glycerol continues to decrease, the freezing point increases gradually
The freezing point of glycerol aqueous solution with different concentration (weight %) is
10%, -1.6℃;
30%, to 9.5 ℃;
50%, to 23.0 ℃;
66.7%, to 46.5 ℃;
80%, to 20.3 ℃;
90%, to 1.6 ℃.


Instruments for the experiment
1, SH128 automatic freezing point tester, using embedded system design, the whole process of automatic test detection;Color touch screen;The test results can be stored;You can view historical data;Printing results on the instrument, mechanical automatic mixing, experimental results can be exported through the U disk, stored in the computer can be compared for many times.


2, alcohol,


3, in line with the standard SHT0090-1991 engine coolant freezing point determination method





Experimental steps:
1. After the instrument is unpacked, please count the accessories according to the packing list. If there is any damage, please contact our company.


2. The instrument should be carried vertically, and the tilt Angle along the height of the instrument should not exceed 30 degrees. It should be placed in a dark place and placed smoothly, otherwise there will be vibration after the start of the instrument, which will affect the service life of the instrument.


3. Check the alcohol level in the cold margin tank to ensure that the alcohol level should exceed the refrigeration plate in the cold margin. When the alcohol is insufficient, it is necessary to add enough alcohol first, and then carry out the experiment.


4, the instrument power supply is connected to the capacity of more than 220V/10A socket, pay attention to must have a good grounding wire.


5. Take out the sample of 75 ~ 100ml with the measuring cylinder and put it into the cooling flask.


6. Place the cooling bottle in the coolant and plug the bottle tightly.

泰兴市| 张家川| 北宁市| 申扎县| 成安县| 视频| 乌拉特中旗| 丰原市| 自贡市| 诏安县| 左云县| 和林格尔县| 日喀则市| 松阳县| 万盛区| 绥化市| 刚察县| 京山县| 青田县| 长白| 高青县| 新巴尔虎左旗| 北辰区| 尚志市| 琼中| 凉城县| 灯塔市| 开平市| 合阳县| 昌图县| 新沂市| 诸暨市| 金乡县| 海安县| 石柱| 瓮安县| 彰化县| 贞丰县| 镇江市| 乳源| 灵武市|